Current Position:Home > News
Stainless steel gate installation specification problem |
發布日期:2022-04-21 22:07:00 點擊數:464 次 新聞來源: |
How should the stainless steel gate be installed? What are the specifications for the installation of stainless steel gates? Let's find out together! 1 When the pipe gallery pipes entering and leaving the device are connected to the main pipes on the pipe gallery of the whole plant, a valve for cutting off must be installed. The installation position of the valve should be centrally arranged on one side of the device area, and the necessary operation platform or maintenance platform should be set up. 2 Valves that require frequent operation, maintenance and replacement should be located on the ground, platform or ladder easily accessible. Pneumatic and electric valves should likewise be located within easy access. 3 Valves that do not need to be operated frequently (only used when driving and parking), if they cannot be operated on the ground, should also be arranged in a place where a temporary ladder can be erected. 4. The height between the center of the valve handwheel and the operation surface is between 750 and 1500mm, and the suitable height is 1200mm. The installation height of the valve that does not need frequent operation can reach 1500 to 1800mm. When the installation height cannot be lowered and frequent operations are required, an operating platform or steps should be provided in the design. Valves on pipes and equipment for hazardous media shall not be set within the height range of people's heads. Through the above introduction, you should know what are the specifications for the installation of stainless steel gates! |
上一個:Design Concept of Stainless St... 下一個:What are the precautions for t... |
---|
Contact us
Welcome to the official website of Wenzhou Jiangrui Valve Technology Co., Ltd.! ! ! Address:Hesan Industrial Zone, Oubei Street, Yongjia County, Wenzhou City掃一掃 更多精彩
Wechat QR code